Agspares - Keeping tractors in action

sales@agspares.co.nz

NEW ZEALAND

Weld-On Lower link Ball Ends and Quick Hitch Hooks

NARROW SHANK


PART No.	HOLE DIA.		"B"	"C"	"D"	"E"
E0563	3/4"	(19mm)	30	52	45	13
E0564	1"	(25.4mm)	30	59	51	17

Now forged from carbon 1045 steel!

WIDE SHANK


PART No.	HOLE DIA.		"B"	"C"	"D"	"E"
E0567	7/8"	(22mm)	62	71	35	16
E0569	1"	(25.4mm)	71	78	44	20
E0570	1 1/8"	(28.6mm)	70	78	38	20
B2591	1 7/16"	(36.5mm)	78	86	45	20

ROUND SHANK


PART No.	HOLE DIA.		"B"	"C"	"D"	"E"
E0565	3/4"	(19mm)	30	65	45	15

QUICK HITCH BALLS WITH GUIDE -LOWER LINK

Part	CAT.	A =	B =
E5020	1/1	7/8" (22mm)	1-47/64" (44mm)
E5021	2/1	7/8" (22mm)	2-13/64" (56mm)
E5022	2/2	1-1/8" (28.6mm)	2-13/64" (56mm)
E5023	3/2	1-1/8" (28.6mm)	2-1/2" (63.5mm)
E5024	3/3	1-7/16 (36mm)	2-1/2" (63.5mm)

WELD-ON LOWER LINK HOOK ENDS

Lower link Weld on conversion kits

Part	CAT.	Weld Area	HP
E5017 Hook-end	1	30x80mm	50hp
E5018 Hook-end	2	35x100mm	150hp
E5019 Hook-end	3	40x110mm	280hp
E5015 Kit	2	35x100mm	150hp
E5016 Kit	3	40x110mm	280hp

Tractor Linkage Category Size Chart
	Top Link		Lower Link		Typical Use
Cat 0	5/8	16mm	5/8	16mm	Compact
Cat 1	3/4	19mm	7/8	22mm	16-45 HP
Cat 20mm	-	20mm	-	-	JD
Cat 2	1"	25.4mm	1-1/8	28mm	45-120 HP
Cat 28mm	-	28mm	-	-	NH
Cat 30mm	-	30mm	-	-	Case
Cat 3	1-1/4	32mm	1-7/16	36mm	100-225 HP
Cat 4	-	45mm	2	51mm	150-350 HP
Cat 36mm	-	36mm	-	-	-

crt card image